Manufacturer of CF3M Female Sylphon Steam Trap, Refer A217 Gr. WC9 Sylphon Adjustable Radiator Valves dimensions
Sylphon Type Steam Trap is a type of thermostatic steam trap. The trap works by expanding and condensing of the steel plug that is inside the chamber. The trap has a body with spring on top of it connected to the plug and the plug sits in the seating blocking the entrance. Once the water has entered into the chamber, the valve is open and it allows for the water to flow through. The CS16H Sylphon Steam Trap is one of the type of materials used for making the trap. When steam enters the trap, it excerpts much heat than the hot water. This allows for the plug to expand and to block the outlet. The steam starts to condense and the heat is released. Once the temperature is low, the steel plug condenses as well. With this, the spring allows for the plug to leave the valve and the valve is open.
ASTM A216 Gr. WCB Sylphon Type Steam Trap
CF3M Female Sylphon Steam Trap
A217 Gr. WC9 Sylphon Adjustable Radiator Valves
ASTM A351 CF8M Sylphon Type Steam Trap Manufacturers in Mumbai, View CS16H Sylphon Steam Trap Specification
The Stainless Steel Sylphon Type Steam Trap can come in different material types. The body is made up of WCB or stainless steel with the bonnet in the same material. The cap, screen and disc are made up of stainless steel. This type of trap has excellent air discharge capacity because it resists overheating. The water hamper effect is also very low in the Cast Steel Sylphon Type Steam Trap models. The system is corrosion resistant and is temperature sensing. This means the trap can operate without manual influence while at operation. The Sylphone Steam Trap also comes in various sizes and dimensions according to different standards.
Table of Content
| Size | 15 & 20 |
| End connections | BSP/BSPT/NPT |
| No. | Parts | Material |
| 1 | Body | WCB / Stainless Steel |
| 2 | Bonnet | WCB / Stainless Steel |
| 3 | Cap | Stainless Steel |
| 4 | Screen | Stainless Steel |
| 5 | Disc | Stainless Steel |
| Nominal Diameter | DN15-50 |
| Nominal Pressure | PN16-40 |
- It is excellent in air discharge capacity, and is resistant to overheating steam and water hammer.
- It has a certain circled operation when the temperature is too low during a certain scale of pressure.
- The valve body is loaded with sylphon, which can be one single unit, or double units, or even multiunits. It can also be applied into the occations which requires for large dischange capacity.
Refer Stainless Steel Sylphon Steam Trap Valves Dimensions Chart, Leading Supplier of Cast Steel Flanged Sylphon Type Steam Trap
| Temperature Range | 250℃ |
This type of thermostatic steam traps works by the welded stainless steel thermostatic element expanding with heat and contracting with cold. When the air and condensation water is getting into the valve body, the valve is in the "open" status.And after they have gotten into it,the thermostatic element will expand and close the trap tightly.
| Model No. | A | AI | ||||
| Pipe Connections | 20 | 25 | 32 | 40 | 50 | 15 – 20 – 25 |
| “B” Height | 130 | 130 | 148 | 189 | 248 | 140 |
| “C” Face-to-Face (screwed) | 124 | 124 | 117 | 146 | 194 | 127 |
| “D” Bottom to CL | 25.4 | 25.4 | 31.0 | 35.7 | 42.9 | 65.1 |
| “H” Width | 164 | 164 | 206 | 214 | 295 | 165 |
| “K” Connection Offset | 95.2 | 95.2 | – | – | – | – |
| “M” CL to CL | 76.2 | 76.2 | 76.2 | 106.0 | 152.0 | – |
| “N” Top to CL | 85.7 | 85.7 | 95.2 | 95.2 | 127.0 | 93.7 |
| Weight in kg (screwed) | 4.3 | 3.7 | 5.0 | 8.5 | 18.1 | 4.4 |
ASTM A351 CF8M Sylphon Type Steam Trap
CS16H Sylphon Steam Trap
Stainless Steel Sylphon Steam Trap Valves
Cast Steel Flanged Sylphon Type Steam Trap
Cast Iron Threaded Sylphon Type Steam Trap
Bronze Female Sylphon Steam Trap
| Size Range | 2 to 24 inch |
| Maximum allowable pressure | 8,5 bar @ 178°C |
Ready Stock of Cast Iron Threaded Sylphon Type Steam Trap, Stockholder of Bronze Female Sylphon Steam Trap
| Maximum back pressure | 99% of inlet pressure |
| Maximum operating temperature | 217°C |
- Moderate capacity
- Excellent air handling
- Designed to fail open
- Designed for superheat
- In-line renewable
- Long life materials
- Broad range of pressure class
- Unaffected by corrosive condensate, freezing, and water hammer
- In-line maintenance – factory matched repair kit installed in minutes
- Full range operation without adjustment
- High temperature discharge
Distributor of Brass Sylphon Adjustable Radiator Valves, View Carbon steel Sylphon Type Steam Trap Weights Chart
- steam-traced pipe
- dryer and industrial heating steam equippment