Manufacturer of Bifold Manifold Valve, Check Dimensions of Choke Manifold Valve
Stainless Steel Manifold Valves
3 way pneumatic manifold Valve
High Pressure Diverter Manifold Valve
Refer Size Range of Hydraulic Manifold Valve, Heating Manifold Valve
Table of Content
| Size | 50NB — 600NB |
|---|---|
| Pressure | 150PS1 |
| Temperature | 0 Deg C - 1200 Deg C. |
| Body , Chest | Solid One piece casting of Cast Iron Fg 260, Cast Steel Gr WCB ,CF8,CF8M. |
| Seat | Integral to Body, Soft, Optional. |
| Gate | AISI SS 304,316,316L,317,317L |
| Screw Spindle | AISI SS 410,304,316. |
| Nut | Brass |
| Yoke | Plate type of MS . |
| Gland Follower | Cast Iron , Cast steel , Ductile Iron ,CF8,CF8M. |
| Hand Wheel | Cast Iron , Cast steel , Ductile Iron |
| Gland Packing | PTFE , PTFE Impregnated |
| Ends | Lugged |
| Port | STANDARD [Round], Optional V Port, Diamond Port,. |
Stainless Steel Manifold Valves
2 Way Manifold Valve
3 Way Manifold Valve
5 Way Manifold Valve
4 Way Manifold Valve
Brass Manifold Valve
Bulk Manifold Valve
Block And Bleed Manifold Valve
Block Manifold Valve
Bifold Manifold Valve
Choke Manifold Valve
Cylinder Manifold Valve
| Pressure Rating | 6000 psig |
| Temperature Rating | 426ºC |
- Bonnet : back seated blow out proof.
- Spindle : ground and thread rolled. Packing below thread.
- Spindle : ground and thread rolled. Packing below thread.
- Dust cap : dust cap protects stem threads from external contamination heat code traceability.
Leading Stockist of Low Pressure Manifold Valve, Cylinder Manifold Valve
| NO. | COMPONENT | MATERIAL SPECIFICATION |
| 1. | HANDLE | STAINLESS STEEL |
| 2. | HANDLE PIN | STAINLESS STEEL |
| 3. | SET SCREW | |
| 4. | LOCK NUT | STAINLESS STEEL |
| 5. | PACKING BOLT | 316SS |
| 6. | PACKING SUPPORT | REINFORCED TFE |
| 7. | PACKING | TFE/GRAFOIL |
| 8. | BONNET | 316SS |
| 9a. | STEAM (NEEDLE TIP) | |
| 9b. | STEAM (PLUG TIP) | |
| 10. | SEAT (PLUG TIP) | DELRIN |
| 11. | LOCK PLATE | STAINLESS STEEL |
| 12. | CAP SCREW | |
| 13. | MANIFOLD BODY | 316SS |
- Face to Face according to : ASME B16.10
- Design & Manufacture according to : BS 1868
- Pressure & Temperature according to : ASME B16.34
- Flange Dimensions according to : ASME B16.5
- Visual Inspection according to : MSS SP-55
- Test & Inspection according to : API 6D / API 598
- Marking according to : MSS SP-25
- Available in variety of material
- Low operating Torques
- High Pressure Rating Available till 15000 ps
- Compact design
- Variety of end connections includes Male / Female NPT, BSPT, BSPP
- Dust Cap provided
- Every Check Valves is factory tested
| Monel : Grade: Monel 400, Monel K500, Monel R-405 Nickel : Grade: Nickel 200, Nickel 201 Inconel : Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718 Incoloy : Grade: Incoloy 800, Inconel 800H, 800HT Hastalloy : Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X Titanium : Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11 Stainless Steel : Grade: ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 333, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 Carbon Steel : Grade: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70, SA105 Duplex Steel: Grade: ASTM / ASME A/SA 182 UNS F44, F45, F51, F53, F55, F60, F61 Alloy Steel: Grade : ASTM SA 182 - E25, E26, E27, E28, E29B, E30B, E39B, E40B, E36B, E36C, E41B, AISI4130, AISI4140, AISI4340, 42CRMO4, 16MNCR5, 20MNCR5, 21CrMoV57, EN353, EN354, F11, F22, F91, F9, P11, P22, P91, P9, P5, P92, EN42J, EN8, EN19 |
- Pneumatic seat test is performed at 1/4 of working pressure. Hydrostatic shell test is performed at 1.5 times the working pressure.
- Lubrication : Molybdenum disulphide (mos2)
Ready Stock of 2 Way/ 3 Way/ 5 Way/ 4 Way Brass Manifold Valve ready to dispatch
| Operating pressure | Max.: 700 bar (10,153 psi) |
| Port size | 0.5 in |
| CW617N Standard | Cu | Pb | Ni | Sn | Fe | Al | Zn | |
| Min. % | 57.0 | 1.6 | 0.0 | 0.0 | 0.0 | 0.0 | Bal. | |
| Max. % | 59.0 | 2.5 | 0.3 | 0.3 | 0.3 | 0.05 | Bal. |
| Working Temperature | -10°C to 100°C |
Supplier of Thermostatic Manifold Valve & High Pressure Manifold Valve in India
- General Plant Service
- Pressure Instrumentation devices
- Differential pressure Instrumentation devices
- Pressure equalization
- Block and bleed applications
- Venting