Sliding gate valve manufacturer in India

Supplier of a Slide knife gate valves, check Pneumatic Sliding Gate Valve price here

sliding gate valves are linear motion gate valves. The gate valves are the most used valves to control the flow of fluids and gases in pipelines. The gate valves come in different types. Sometimes valves are needed to control the flow of powdered material as well. The sliding gate valves pneumatic is a type of gate valve that has airtight opening and closure. The gate is made up of ductile iron or mild carbon steel depending on the application need. The sliding gate valves manufacturers produce the valves in different grades of materials such as ferritic, austenitic, duplex and alloy steel materials. The slide gate has a rectangular slide plate or a stainless steel plate to open or shut the dry material flow through the valve.

SS Sliding Gate Control Valve Manufacturers, Check Dimensions of Pneumatic Sliding Gate Valves

The compression loaded polymer plates on two sides accommodate the slide plate. This type of gate valve can self clean due to the opening and shutting operation. This prevents packing of material inside the valve and clocking it. The slide gate valves suppliers produce the valves in different dimensions according to the DN and other international standards. There are valves ranging from 2 inches to 24 inches and pressure capacities ranging from PN10 through PN16 in general. But based on the customer requirements, larger diameter valves such as sliding gate valve 90mm can be produced. Slide gates are preferred where knife gates cannot perform sufficiently to control the flow of powdered material. The applications are mostly in food processing and pharmaceutical industries.

 

• The disc and plate remain in constant contact, eliminating chatter.
• The straight-through flow passage minimizes turbulence, a prime cause of valve noise.
• The multiple orifices in the plate and disc divide the flow into smaller flow components

• Self Operated
• Pilot-Operated
• Differential Regulators
• Vacuum Regulators
• Wafer-Style Control Valves
• Three Way Control Valves
• Electric Control Valves

• For proportional, on-off, or 4-20 mA electronic control
• Sizes to 6”, Cv’s to 395

View Ready Stock of Cast Steel Manual Sliding Gate Valve, CF8M Stainless Steel Slide Gate Valves Suppliers

• Shell test: Hydro test at 1.5 times the rated CWP — zero allowable leakage
• Seat test: Resilient seat — Hydro test at 15 psi (1 bar) and rated CWP — allowable leakage

Refer A351 CF8 304 Sliding Gate Valve 100mm Price List, Stockholder of Stainless Steel 316 Sliding Knife Gate Valve

• “D” Ring Seat
• Dual Seats
• Poly Replaceable Seats
• UHMW Replaceable Seats
• PTFE Replaceable Seats
• Rubber Replaceable Seats
• Hard Faced Replaceable Seats
• Hard Faced Integral SS Seats
• Hard Faced Gate Edge
• Hard Gate Material
• Nickel -TFE Coated Gate
• Epoxy Coating
• Thru Drilled Flanges
• Flush Ports

Check Weight Chart of ASTM A351 CF8M Sliding Gate Valve 90mm, Stainless Steel Sliding Gate Valves Stockist

• Chemical and pharmaceutical industry
• Steel and aluminium plants
• Food and beverage industry
• Breweries
• Textile manufacturing