suppliers of SS 316 Hydraulic Choke Valve, Don't forget to check ASTM A351 CF8 Angle Type Control Valve Dimensions
Angle Control Valve is a type of valve that has the inlet joining the main body of the valve in an angle. The angles can vary depending on the fluid flow dynamics such as the viscosity and velocity of the fluid. The body contains the valve, the stem and the controlling mechanism with angled inlet and straight outlet. The Angle Type Control Valve is useful in applications where the right angled control valves cannot be used. The valves are made up of different materials such as the 304, 316 and other austenitic stainless steels, cast iron, carbon steel, ductile iron and higher alloyed stainless steel materials.
Stainless Steel Angle Control Valve
SS 316 Hydraulic Choke Valve
ASTM A351 CF8 Angle Type Control Valve
Angle Control Valve Manufacturers, Check angle type control valve Dimensions
The components of the Angle Globe Control Valve can be made up of different materials than the valve body itself. The valve type can vary based on the component that is angled as well. The Angle Seat Control Valve has the seat angled while the other type has the body angled. The valves come in different dimensions and sizes with different pressure capacities as well. The Angle Body Control Valve has the body in an angle aligning with the pipeline. The sizes range from1/2 inches to 48 inches and the pressure capacities range from PN10 through PN16 or 150lbs to 2500lbs.
Table of Content
| Size | 50NB — 600NB |
|---|---|
| Pressure | 150PS1 |
| Temperature | 0 Deg C - 1200 Deg C. |
| Body , Chest | Solid One piece casting of Cast Iron Fg 260, Cast Steel Gr WCB ,CF8,CF8M. |
| Seat | Integral to Body, Soft, Optional. |
| Gate | AISI SS 304,316,316L,317,317L |
| Screw Spindle | AISI SS 410,304,316. |
| Nut | Brass |
| Yoke | Plate type of MS . |
| Gland Follower | Cast Iron , Cast steel , Ductile Iron ,CF8,CF8M. |
| Hand Wheel | Cast Iron , Cast steel , Ductile Iron |
| Gland Packing | PTFE , PTFE Impregnated |
| Ends | Lugged |
| Port | STANDARD [Round], Optional V Port, Diamond Port,. |
Angle control valves are structured so that the center lines of the entrance and exit of the fluid intersect perpendicularly. Horizontal line is the entrance and the vertical line is the exit. This structure allows the fluids commonly known as slurry (i.e. viscous fluids and fluids including solid bodies) to pass more easily through the valve, making it suitable for controlling them.
| Internal diameter | 3/4" to 6" |
| Pressure rating | JIS 10K to 40K, JPI 150 to 2500, ANSI 150 to 2500 |
| Temperature range | 0 to 425 °C |
Leading Supplier of angle globe control valve, Buy angle seat control valve at factory Price
| Cv range | 0.01～390（On-off：0.4～410） |
| Flow Co-efficients | 0.7 |
| Nominal size | DN20~200 NPS3/4〞~ 8〞 |
ASTM A351 CF8M 316 Angle Control Valve
CF8M Stainless Steel Inline Choke Valve
Stainless Steel 316 Angle Choke Valve
A351 CF8 304 Manual Choke Valve
CF8 Stainless Steel Hydraulic Choke Valve
Stainless Steel 304 Angle Seat Control Valve
| Pressure Classes | PN16 ~ 100 CLASS 150LB ~ 600LB |
| Temperature Range | 0°C to 150°C (32 to 300 °F) |
Refer angle body control valve Pressure Rating, Biggest Stockist of angle flow control valve
| Pneumatic | Electric | |
|---|---|---|
| Allowable tolerance, % | ±1.5 | ±1.0 |
| Allowable leakage | Metal seal: IV grade（0.01% rated capacity）, Soft seal: VI grade（foam grade）Leakage standard: GB/T 4213 |
| Air supply pressure | 5 to 150 psig |
| Environmental temperature | 40° |
right angle flow control valve Distributor, angle pressure control valve Manufacturers In India
- Actuators: optionally pneumatic, hydraulic, electric or hand-drive.
- Versatile options from the ECOTROL® modular parts system for the inner parts.
- Exchangeable trims