3 Way Stainless Steel diverting ball valve supplier in Mumbai
3 Way Mixing Diverting Control Valve operates with different methods such as electric control or manual control. The valve has three ports allowing for input and output. The port sizes range from DN20 through DN300 or from ¾ inches to 12 inches. The pressure capacities of the 3 Way Mixing & Diverting Valves vary from PN16 through PN100. These pressure numbers indicate the pressure levels they can handle, from 150lbs to 600lbs. the Stainless Steel 3 Way Mixing Diverting Control Valve can operate with water, oil, steam and gas media with temperatures varying greatly. The operating temperature of the neumatic 3 Way Mixing Diverting Globe Control Valve can range from -196 degrees Celsius cryogenic temperature to 450 degrees Celsius elevated temperature as well.
3 Way Mixing Control Valve
Stainless Steel diverting ball valve
A351 CF8 3-way Temperature Control Mixing Valve
View Stainless Steel 3 Way Mixing Diverting Control Valve Pressure Rating, Leading Manufacturer of Carbon Steel 3-way Temperature Control Mixing Valve
The material used to make the body can range as WCB, CF8 or CF8M. The connection type of the valve can vary from flanged, threaded or SW as optional method. These can be connected with threaded end pipes or flanged end pipes. The valve is connected perpendicular and vertical to the pipelines. The positioning of the valve can also differ such as air pressure increase or valve close opposite. The operating voltage of the 3 Way Pneumatic Mixing & Diverting Control Valve can vary based on the components and accessories of the valve and the forces needed to operate the valve. These valves are preferred because they are of compact structure, sensitive action, new high allowable pressure, light weight, low pressure drop loss and large valve capacities.
Table of Content
| Size | 50NB — 600NB |
|---|---|
| Pressure | 150PS1 |
| Temperature | 0 Deg C - 1200 Deg C. |
| Body , Chest | Solid One piece casting of Cast Iron Fg 260, Cast Steel Gr WCB ,CF8,CF8M. |
| Seat | Integral to Body, Soft, Optional. |
| Gate | AISI SS 304,316,316L,317,317L |
| Screw Spindle | AISI SS 410,304,316. |
| Nut | Brass |
| Yoke | Plate type of MS . |
| Gland Follower | Cast Iron , Cast steel , Ductile Iron ,CF8,CF8M. |
| Hand Wheel | Cast Iron , Cast steel , Ductile Iron |
| Gland Packing | PTFE , PTFE Impregnated |
| Ends | Lugged |
| Port | STANDARD [Round], Optional V Port, Diamond Port,. |
| Body Test Pressure | 42 Bar Maximum |
| Operating Temperature | 180°C |
| Dimensions | ||||||||
| Valve Type | Size | L | L1 | B | B1 | C | D | |
| MM | In. | |||||||
| JYCV.S-15 | 15 | 1/2″ | 85 | 151 | 50 | 83 | 185 | 102 |
| JYCV.S-20 | 20 | 3/4″ | 110 | 185 | 66 | 130.5 | 194 | 102 |
| JYCV.S-25 | 25 | 1″ | 120 | 189 | 72 | 106.5 | 204 | 102 |
| JYCV.S-40 | 40 | 1-1/2″ | 150 | 232 | 91 | 132 | 285 | 134 |
| JYCV.S-50 | 50 | 2″ | 190 | 283 | 100 | 146.5 | 292 | 164 |
| Air Pressure | 3.5 - 7 bar |
Duplex 2205 3 Way Diverting Ball Valve Supplier in Mumbai, Refer ASTM A351 CF8M 3 Way Diverting Control Valve Dimensions
| Temperature Range | 250 degree |
| Size Range | 1/2 to 4 inch (15 - 100 mm) |
| Parts Name | Material |
| Valve Body | WCB、304、316、WC6、WC9、Ti、Ni、Hastelloy、Monel,etc |
| Valve Plug & Valve Seat | 304、316、WC6、WC9、Ti、Ni、Hastelloy、Monel,etc |
| Valve Stem | 0Cr18Ni9、2Cr13 |
| Push Rod | 0Cr18Ni9、2Cr13 |
| Spring | 60Si2Mn |
| Bellows | 0Cr18Ni9 |
| Diaphragm | Clip reinforced nylon fabric nitrile rubber |
| Diaphragm Cover | A3、0Cr18Ni9 |
| Gasket | 0Cr18Ni9、graphite wound gasket(V6590)、F4 |
| Packing | PTFE , Flexible graphite |
Stainless Steel 3 Way Mixing Diverting Control Valve
Carbon Steel 3-way Temperature Control Mixing Valve
Duplex 2205 3 Way Diverting Ball Valve
ASTM A351 CF8M 3 Way Diverting Control Valve
Cast Steel 3 Way Diverting Globe Valve
Stainless Steel 304 3 Way Diverting Solenoid Valve
| Operation temperature | -40+230℃ |
| Nominal diameter | DN25~DN400 |
Get latest Price list of Cast Steel 3 Way Diverting Globe Valve, Buy Online Stainless Steel 304 3 Way Diverting Solenoid Valve
| Operating Pressure | 4.5 to 7 BAR (1/2″ to 2″), 5 to 7 Bar (2.1/2″ to 4”) |
| Operating Cycles | 350 to 650 Cycles / Hr |
| Temperature Range | up to 180°C |
A 2-way valve is any type of valve with two ports while 3-way valves have, yes, three ports
Mixing applications have the 3-way valve configured with two inputs from the supply piping and one output to the return piping, while its not possible in 2-way valve
Ready Stock of Alloy Steel ASTM A217 WC1 Three Way Diverting Valve, Stockholder of Brass 3 Way Mixing Control Valve
- Food and beverage industries
- Pharmaceutical industry
- Chemical industry
- Cement industry
- Bulk and solid handling industry
- Ceramic industry