Supplier of GG25 Cast Iron Air Lift Compressor Check Valve in custom sizes
Lift Check Valves are used in suction lines. They avoid the lines running empty. This avoids the need to prime the pumps prior to restarting the operation. These valves can be positioned in any different mounting position in the pipeline as well. There are different material made valves such as the bronze lift check valves. The valves avoid reverse flow in the pipe line as well. The valve I opened by the pressure of the fluid inside the pipeline. Once the flow has stopped, the pressure drops and the valve closes avoiding backflow. There are different types of valves such as the horizontal lift check valves, ball lift check valves and the piston lift check valves.
Stainless Steel Lift Check Valve
API 6A Lift Check Valve
GG25 Cast Iron Air Lift Compressor Check Valve
Cast Steel Hydraulic Lift Check Valve Suppliers In India, Stainless Steel Lift Type Check Valves Manufacturers
They are used in different application requirements. They also can be horizontal, angled or vertical in positioning. However the deflection of flow is high in these ball lift check valve types compared to the swing check valves and the head losses are higher. The valves are made in different material grades such as stainless steel, duplex steel, brass and high alloy materials. The different materials are needed for the different types of liquids flowing through the valves. The piston lift check valves come in different sizes and dimensions ranging from ½ inches to 48 inches in input output sizes and the pressure capacities vary from class 150 through class 2500.
Table of Content
| Size | 50NB — 600NB |
|---|---|
| Pressure | 150PS1 |
| Temperature | 0 Deg C - 1200 Deg C. |
| Body , Chest | Solid One piece casting of Cast Iron Fg 260, Cast Steel Gr WCB ,CF8,CF8M. |
| Seat | Integral to Body, Soft, Optional. |
| Gate | AISI SS 304,316,316L,317,317L |
| Screw Spindle | AISI SS 410,304,316. |
| Nut | Brass |
| Yoke | Plate type of MS . |
| Gland Follower | Cast Iron , Cast steel , Ductile Iron ,CF8,CF8M. |
| Hand Wheel | Cast Iron , Cast steel , Ductile Iron |
| Gland Packing | PTFE , PTFE Impregnated |
| Ends | Lugged |
| Port | STANDARD [Round], Optional V Port, Diamond Port,. |
| Temperature & Pressure Rating | 32 Bar from -10°C to +100°C 14 Bar at +198°C |
| Test Pressures | Shell: 48 Bar Shell: 35.2 Bar |
- Threaded BSP Parallel
- Metal to Metal Seat & Disk
- Screwed-in Cap
- Guided in both cap and seat bore
TEST PRESSURE |
||||||
| Hydraulic Test (tested as per API 598/BS 6755) | ||||||
| Class | 150 |
300 |
600 |
800 |
1500 |
2500 |
| Body (psi) | 450 |
1100 |
2175 |
3000 |
5400 |
9000 |
| Seat (psi) | 325 |
750 |
1500 |
2200 |
3960 |
6600 |
View Carbon Steel Air Lift Compressor Check Valve Dimensions, Refer Pressure Rating of Duplex 2205 Piston Lift Check Valve
| OVERALL DIMENSION | ||||||||
| Size | 8mm |
10mm |
15mm |
20mm |
25mm |
32mm |
40mm |
50mm |
A. End
to End |
85 |
85 |
85 |
92 |
104 |
127 |
127 |
140 |
| B. Socket Weld bore | 14.1 |
17.5 |
21.7 |
27.1 |
33.8 |
42.5 |
48.6 |
61.1 |
| C. Min. bore depth | 9.5 |
9.5 |
9.5 |
12.7 |
12.7 |
12.5 |
12.7 |
16 |
| D. Nominal bore | 1/4" |
3/8" |
1/2" |
3/4" |
1" |
11/4" |
11/2" |
2" |
| E. Centre to top | 56 |
56 |
56 |
66 |
74 |
88 |
88 |
97 |
| F. PORT. Dia | 6.0 |
6.0 |
9.0 |
12.0 |
18.0 |
23 |
23 |
36 |
| Body & Bonnet | A 216 WCB | A 217 WC6 | A 217 WC9 | A 351 CF8M |
| Seat | Stellite / AISI 316 / AISI 410 | |||
| Disc | Stellite / AISI 316 / AISI 410 | |||
| Piston | AISI 420 | AISI 316 | ||
| Stud Bolt | A 193 Gr B7 | A 193 Gr B16 | A 193 Gr B8 CL 2 | |
| Screw | A 194 Gr 2H | A 194 Gr 4 | A 194 Gr 8 | |
| Gasket | 150# : Graphite 300#: Spiral wound stainless / graphite 600#: RTJ | |||
| Flow Coefficients (Cv) for Fully Open Valves | |
| Valve Size | Cv |
| 1.00 | 16 |
| 1.50 | 34 |
| 2.00 | 70 |
| 3.00 | 128 |
| 4.00 | 198 |
| 6.00 | 440 |
| 8.00 | 880 |
| 10.00 | 1200 |
| 12.00 | 1900 |
Stainless Steel Lift Type Check Valves
Cast Steel Hydraulic Lift Check Valve
Carbon Steel Air Lift Compressor Check Valve
Duplex 2205 Piston Lift Check Valve
316 Stainless Steel Flanged Lift Check Valve
ASTM A216 Gr. WCB Forged Lift Check Valve
| Body Size | NPT+ | Butt- Weld+ | Socket, -weld+ | ANSI Flanged | ||||||
| Flange Type | 150 | 300 | 600 | 900 | 1500 | 2500 | ||||
| 1.00 | 8.25 | 8.25 | 8.25 | RF | 7.25 | 7.75 | 8.25 | 9.38 | 9.38 | N/A |
| RTJ | 7.75 | 8.25 | 8.25 | 9.38 | 9.38 | N/A | ||||
| 1.50 | 13.00 | 13.00 | 13.00 | RF | 8.75 | 9.25 | 9.88 | 12.25 | 12.25 | N/A |
| RTJ | 9.25 | 9.75 | 9.88 | 12.25 | 12.25 | N/A | ||||
| 2.00 | 11.25 | 11.25 | 11.25 | RF | 10.00 | 10.00 | 11.25 | 14.75 | 14.75 | 16.88 |
| RTJ | 10.50 | 11.12 | 11.38 | 14.88 | 14.88 | 17.00 | ||||
| 3.00 | CF | CF | RF | 11.75 | 12.50 | 13.25 | 15.50 | 18.12 | 22.75 | |
| RTJ | 12.25 | 13.12 | 13.38 | 15.62 | 18.25 | 23.00 | ||||
| 4.00 | CF | CF | RF | 13.38 | 14.50 | 15.50 | 17.00 | 20.88 | 26.50 | |
| RTJ | 14.38 | 15.12 | 15.62 | 17.12 | 21.00 | 26.88 | ||||
| 6.00 | CF | RF | 17.75 | 18.62 | 20.00 | 24.00 | 27.75 | 36.00 | ||
| RTJ | 18.25 | 19.25 | 20.12 | 24.12 | 28.00 | 36.50 | ||||
| 8.00 | CF | RF | 21.38 | 22.38 | 24.00 | 29.00 | 32.75 | 40.25 | ||
| RTJ | 21.88 | 23.00 | 24.12 | 29.12 | 33.12 | 40.88 | ||||
| 10.00 | CF | RF | 24.50 | 24.50 | 31.00 | 33.00 | 39.12 | C/F | ||
| RTJ | 25.00 | 25.12 | 31.12 | 33.12 | 39.38 | C/F | ||||
| 12.00 | CF | RF | 29.00 | 30.50 | 32.25 | 40.00 | 44.50 | C/F | ||
| RTJ | 29.38 | 31.00 | 32.38 | 40.12 | 45.12 | C/F | ||||
| Valve Size | ANSI Class | “D” | “E” |
| 1.00 | 150-1500 | 7.75 | 3.06 |
| 1.50 | 150-600 | 9.75 | 3.50 |
| 900-1500 | 10.50 | 4.00 | |
| 2.00 | 150-1500 | 12.12 | 4.38 |
| 2500 | 15.12 | 5.25 | |
| 3.00 | 150-900 | 13.50 | 5.50 |
| 1500 | 16.88 | 6.25 | |
| 2500 | 23.12 | 7.62 | |
| 4.00 | 150-900 | 18.38 | 7.00 |
| 1500 | 19.38 | 7.50 | |
| 2500 | 23.12 | 7.62 | |
| 6.00 | 150-600 | 20.75 | 7.50 |
| 900-1500 | 25.00 | 8.62 | |
| 2500 | 30.00 | 10.50 | |
| 8.00 | 150-600 | 26.50 | 9.00 |
| 900 | 27.88 | 10.38 | |
| 1500 & 2500 | 39.00 | 12.75 | |
| 10.00 | 150-600 | 34.00 | 11.63 |
| 900 | 36.25 | 11.94 | |
| 1500 | 39.75 | 13.00 | |
| 12.00 | 150-300 | 37.12 | 12.00 |
| 600 | 38.50 | 12.75 | |
| 900 | 40.12 | 13.50 | |
| 1500 | 43.59 | 14.75 |
Ask for Price list of 316 Stainless Steel Flanged Lift Check Valve, Stockholder of ASTM A216 Gr. WCB Forged Lift Check Valve
| Body Size | NPT | Butt Weld | Socket Weld | Flanged, (ANSI Ratings) |
| 1.00 | * | * | * | 150-1500 |
| 1.50 | * | * | * | 150-1500 |
| 2.00 | * | * | * | 150-2500 |
| 3.00 | * | * | 150-2500 | |
| 4.00 | * | * | 150-2500 | |
| 6.00 | * | 150-2500 | ||
| 8.00 | * | 150-2500 | ||
| 10.00 | * | 150-2500 | ||
| 12.00 | * | 150-2500 |
| Size Range | 1/2” to 28” |
| Item | Parts | CS to ASTM | AS to ASTM | SS to ASTM | |
| Type A105 | Type F22 | Type F304(L) | Type F316(L) | ||
| 1 | Body | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
| 2 | Piston Disc | A276 420 | A276 304 | A276 304(L) | A276 316(L) |
| 3 | Bonnet | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
| 4 | Nameplate | SS | |||
| Suitable Medium | W.O.G. etc | W.O.G. etc | HNO3.CH3COOH etc | ||
| Suitable Temperature | -29°C~425°C | -29°C~550°C | -29°C~180°C | ||
| NPS | Reduced | 3/8" | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" | - |
| Full | - | 3/8" | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" | |
| L | 98 | 98 | 110 | 120 | 140 | 140 | 170 | 200 | |
| H (OPEN) | 85 | 85 | 95 | 105 | 114 | 114 | 132 | 145 | |
| Weights | 3.1 | 3 | 3.7 | 6.5 | 8.5 | 8 | 10.9 | 12.5 | |
Ready Stock of A217 Gr. WC9 Wafer Type Lift Check Valves, Distributor of Super Duplex High Pressure Lift Check Valve
- oilfield production
- water steam
- refining petro
- viscous fluids