Supplier of 316l y strainer
Stainless Steel Strainer is a filtering equipment used to collect solid materials from the flowing liquids. The stainless steel is strong, corrosion resistant and can withstand high temperatures and pressures. The strainer has a filtering mechanism by means of a sieve and collects the filtered residues inside y shaped bottom or a bucket. Based on the collection system the strainer can be a Stainless Steel Y Strainer or a bucket strainer. The y shaped strainer is good for use with high velocity liquid flows as it has an angled collection bottom which captures the filtered particles. The Stainless Steel Y Type Strainer is used in wastewater management, pollution control and in slurry removal systems.
Stainless Steel Y Strainers
316 ss y strainer
316l y strainer
View Stainless Steel Flanged Y Strainer Dimensions, View AISI 316 Y Strainer Check Valve Price
The bucket strainer can be used in low pressure, low flow pipelines as it has a vertical and larger collecting bucket. The sizes and dimensions of the strainers range with the pipe size, standards and specifications.
Table of Content
The 2 Stainless Steel Y Strainer is a two way strainer that can filter the residues through a bidirectional flow. The strainers are also used in different applications such as water lines, oil transmission lines, petroleum, petrochemical, chemical, food processing, brewery and other applications that have to deal with impurities in the liquids. The Ss304 Y Type Strainer is one of the most used as it is cost effective and long lasting material.
| Material | Stainless Steel |
|---|---|
| Seal Material | PTFE/ RPTFE |
| Working Pressure | 1.6 – 6.4Mpa |
| Working Temperature |
-29°C — +180°C |
| Availabe Size | 1/2″-4″,(DN15-DN100) |
| Available Connection | BSP/ BSPT/ NPT/ Flanged/ Welded |
| Nominal Pressure | P10/PN16 |
| Operation | Manual,Pneumatic, Electric |
| Suitable Medium | Water,Sewage,Seawater,Gas,Food,Oils,etc |
| Standards | GB9112,DIN2501,BS4504,ISO2084,ANSI125 |
| Applications | Water, Oil, Gas, |
| Nominal Diameter |
DN40-DN300 handle lever
|
| Operation Temperature | -10°C~150°C |
| Type | Carbon | Manganese | Phosphorus | Sulphur | Silicon | Chromium | Nickel | Molybdenum |
|---|---|---|---|---|---|---|---|---|
| 302 | 0.15 | 2.00 | 0.045 | 0.030 | 1.00 | 17.00/19.00 | 8.00/10.00 | – |
| 309 | 0.20 | 2.00 | 0.045 | 0.030 | 1.00 | 22.00/24.00 | 12.00/15.00 | – |
| 304L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/12.00 | – |
| 304* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.00/20.00 | 8.00/10.50 | – |
| 309S | 0.08 | 2.00 | 0.045 | – | 1.00 | 22.00/24.00 | – | – |
| 317 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00/1.00 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 310S | 0.08 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 316* | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 310 | 0.25 | 2.00 | 0.045 | 0.030 | 1.5 | 24.00/26.00 | 19.00/22.00 | – |
| 316L* | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.00/18.00 | 10.00/14.00 | 2.00/3.00 |
| 347 | 0.08 | 2.00 | 0.040 | 0.030 | 0.5/1.00 | 17.00/19.00 | 9.00/12.00 | 0.5/0.75 |
| 317L | 0.03 | 2.00 | 0.045 | 0.030 | 0.75 | 18.00/20.00 | 11.00/15.00 | 3.00/4.00 |
| 321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 17.00/19.00 | 9.00/12.00 | 0.75/0.75 |
| Type | UNS | Tensile, (ksi) min | Yield, (ksi) min | Elongation, min | Hardness, (Brinell) max | Hardness, (Rockwell B) max |
|---|---|---|---|---|---|---|
| 302 | S30200 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304* | S30400 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 304L* | S30403 | 70 | 30 | 40% in 2″ | 183 | 88 |
| 309 | S30900 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 309S | S30908 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310 | S31000 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 310S | S31008 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316* | S31600 | 75 | 30 | 40% in 2″ | 217 | 95 |
| 316L* | S31603 | 70 | 25 | 35% in 2″ | 217 | 95 |
| 317 | S31700 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 317L | S31703 | 75 | 30 | 35% in 2″ | 217 | 95 |
| 321 | S32100 | 75 | 30 | 40% in 2″ | 183 | 88 |
| 347 | S34700 | 75 | 30 | 40% in 2″ | 183 | 88 |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
| SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
| SS 310H | – | S31009 | – | – | – | – | – |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| SS 316H | 1.4401 | S31609 | – | – | – | – | – |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
| SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
| SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
| SS 321 | 1.4541 | S32100 | SUS 321 | – | – | – | X6CrNiTi18-10 |
| SS 321H | 1.4878 | S32109 | SUS 321H | – | – | – | X12CrNiTi18-9 |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
Refer 316 SS Flanged Y-type Strainer Manufacturer, Top Notch Supplier of SUS 304 Foot Valve Strainer
- 1/4" pipe size, 800 psi WOG
- 3/8" pipe size, 800 psi WOG
- 1/2" pipe size, 800 psi WOG
- 3/4" pipe size, 800 psi WOG
- 1" pipe size, 800 psi WOG
- 1-1/4" pipe size, 800 psi WOG
- 1-1/2" pipe size, 800 psi WOG
- 2" pipe size, 800 psi WOG
| Maximum Operating Pressure | 3705 psig @ 100 deg. F. |
| Size | L | D | Blow-off NPT | Shipping Weight(LBS) | |
|---|---|---|---|---|---|
| Inches | Prefix | ||||
| 1/2 | 50 | 6 | 2 9/16 | 1/4 | 9 |
| 3/4 | 75 | 7 1/2 | 3 | 1/4 | 11 |
| 1 | 100 | 7 3/8 | 3 3/8 | 1/4 | 15 |
| 11/2 | 150 | 7 1/4 | 4 3/4 | 1/2 | 18 |
| 2 | 200 | 8 5/8 | 4 7/8 | 1/2 | 30 |
| 2 1/2 | 250 | 10 1/4 | 7 1/2 | 3/4 | 44 |
| 3 | 300 | 11 5/8 | 7 3/4 | 1 | 60 |
| 4 | 400 | 14 1/4 | 9 1/8 | 11/2 | 96 |
| 5 | 500 | 17 5/8 | 11 | 2 | 150 |
| 6 | 600 | 18 5/8 | 13 3/8 | 2 | 174 |
| 8 | 800 | 24 3/8 | 14 5/8 | 2 | 264 |
| 10 | 1000 | 26 | 17 1/4 | 2 | 414 |
| 12 | 1200 | 30 3/8 | 21 | 2 | 615 |
| 14 | 1400 | 36 | 27 3/16 | 2 | 720 |
| 16 | 1600 | 46 9/16 | 30 1/4 | 2 | 956 |
| 18 | 1800 | 46 | 35 11/16 | 2 | 1130 |
| 20 | 2000 | 49 1/2 | 40 | 2 | 1500 |
| 24 | 2400 | 58 3/8 | 44 1/2 | 2 | 1990 |
Stainless Steel Flanged Y Strainer
316 SS Flanged Y-type Strainer
SUS 304 Foot Valve Strainer
316l Stainless Steel Ball Valve Strainer
SAE 304 Check Valve Strainer
AISI 316 Y Strainer Check Valve
| Sizes | |||
|---|---|---|---|
| Size | Nomen. | Size | Nomen. |
| 1/8″ | 6 | 8″ | 200 |
| 1/4″ | 8 | 10″ | 250 |
| 3/8″ | 10 | 12″ | 300 |
| 1/2″ | 15 | 14″ | 350 |
| 3/4″ | 20 | 16″ | 400 |
| 1″ | 25 | 18″ | 450 |
| 1 1/4″ | 32 | 20″ | 500 |
| 1 1/2″ | 40 | 22″ | 550 |
| 2″ | 50 | 24″ | 600 |
| 2 1/2″ | 65 | 26″ | 650 |
| 3″ | 80 | 28″ | 700 |
| 4″ | 100 | 30″ | 750 |
| 5″ | 125 | 32″ | 800 |
| 6″ | 150 | 36″ | 900 |
| SIZE (mm) | 15 | 20 | 25 | 40 | 50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 |
| A 150 # | 140 | 152 | 165 | 203 | 229 | 280 | 317 | 368 | 470 | 597 | 673 | 775 |
| A 300 # | 146 | 160 | 171 | 210 | 235 | 287 | 335 | 385 | 493 | 623 | 707 | 813 |
| A 600 # | 165 | 191 | 216 | 241 | 292 | 330 | 356 | 432 | 559 | 660 | 788 | 838 |
Ready Stock of 316l Stainless Steel Ball Valve Strainer, Stockholder of Ss304 Y Type Strainer
| Materials | |
|---|---|
| Type Of Materials | Nomen. |
| S S310 | S1 |
|
SS304 / ASTM A182 Gr. F304 |
S4 |
| SS304 L | S4L |
| SS316 | S6 |
| SS316L | S6L |
| SS317 | S7 |
| SS321 | S21 |
| SS446 | S46 |
| Monal 400 | M4 |
| Incoloy 625 | I6 |
| Incoloy 825 | I8 |
| Carbon Steel | CS |
| A105 | A1 |
| Alloy 20 | A20 |
| ASTM A182 F51 (Duplex F51) |
F51 |
| ASTM A182 F60 (Duplex F60) |
F60 |
|
ASTM A182 F53 (Super Duplex F53) |
F53 |
| ASTM A312 TP 304L | P4L |
| ASTM A182 F11 | F11 |
| ASTM A182 Gr. F5 | F5 |
| ASTM A312 TP 304 | TP4 |
| Hastelloy C276 | HC2 |
| A350 Gr. LF1/ LF2/ LF3 |
LF2 |
| SS410 | S41 |
| ASTM A240 TP 316L | P6L |
| Inconel-600 | I60 |
| ASTM A234 Gr. WPB | WPB |
| Mild Steel | MS |
| Nickel Alloy | NA |
| Galvanized | GLV |
- Perforated screens
- Mesh screens
- Available with 316 (CF8M) body and cap in Screwed BSPP, sizes: 1/4" up to 4".
- Screen mesh size: 1mm with 2mm pitch.
- Temperature range: -20°C to 180°C .
- Pressure rating: 800 PSI.
| No. | Component Name | Qty. |
|---|---|---|
| 1 | Body | 1 |
| 2 | Screen | 1 |
| 3 | Gasket | 1 |
| 4 | Cover | 1 |
| 5 | Bolt | 6 |
| 6 | Nut | 6 |
| 7 | Hex Drain Plug | 1 |
We keep ready stock of following types of Stainless Steel Strainers
| Y Tpe Strainer | ASTM A351 Cf8m Strainer |
| T Type Strianer | ASTM A351cf3m Strainer |
| Basket Type Strainer | Cn7m Strainer |
| Flange End Strainer | Casting Strainer Threded |
| Buttweld End Strainer | Forged Strainer Threded |
| Fabricated Basket Strainer | Socket Weld Strainer |
Distributor of 3/4 Stainless Steel Y Strainer, View SAE 304 Check Valve Strainer Weights Chart
- Easy cleaning without interrupting the process.
- Various perforations, mesh or perforation mesh combinations are available to meet your process requirements.
- Can be installed either in a horizontal or vertical position