Supplier of PN10/ PN16/ PN25 Pressure DIN 3202 F4 Gate Valve and GGG50 Cast Iron Ball Valve in Mumbai
Ductile iron valves can be used in high stress piping systems. The material is highly ductile and does not break at stress. The material can perform up to 730 degrees Celsius operating temperature range. The nodule shaped graphite in the metallurgic microstructure helps the material to achieve the mechanical properties. The ductile iron ball valves are some of the most used in daily life applications. There are domestic, commercial and industrial applications that use the valves in different conditions and under different circumstances. The different types of valves include the ductile iron plug valves which are used to regulate bidirectional as well as unidirectional flows inside piping systems.
Ductile Iron Valve
PN25 Pressure DIN 3202 F4 Gate Valve
GGG50 Cast Iron Ball Valve
F4 Ductile Iron Butterfly Valve Manufacturers In India, Refer Ductile Iron Valves Specifications
The plug valves have a plug inside the valve body that regulates the flow. There are other types such as the gate valves which use a gate to regulate the flow. The gate is connected to a stem and the stem is connected to the handwheel that operates the valve.
Table of Content
The ductile iron butterfly valves are gate valves that have gates in the shape of a butterfly. The gate is a disc that is connected to a central disc to facilitate the bidirectional flow. There are different types of ductile iron pipe valves such as check valves which allow only unidirectional flows.
| Material | Ductile iron |
|---|---|
| Seal Material | PTFE/ RPTFE |
| Working Pressure | 1.6 – 6.4Mpa |
| Working Temperature |
-29°C — +180°C |
| Availabe Size | 1/2″-4″,(DN15-DN100) |
| Available Connection | BSP/ BSPT/ NPT/ Flanged/ Welded |
| Nominal Pressure | P10/PN16 |
| Operation | Manual,Pneumatic, Electric |
| Suitable Medium | Water,Sewage,Seawater,Gas,Food,Oils,etc |
| Standards | GB9112,DIN2501,BS4504,ISO2084,ANSI125 |
| Applications | Water, Oil, Gas, |
| Nominal Diameter |
DN40-DN300 handle lever
|
| Operation Temperature | -10°C~150°C |
| Carbon | 3.00% minimum |
|---|---|
| Phosphor | 0.08% maximum |
| Silicon | 2.50% maximum |
| Tensile strength : | 412N/mm2 |
|---|---|
| minimum Yield strength : | 275N/mm2 minimum |
| Elongation : | 18%minimum |
| Brinell hardness : | 143 to 187 |
- Body : Ductile Iron GGG500-7
- Wedge : D/I , core fully vulcanized with NBR or EPDM rubber
- Wedge Nut : Brass
- Stem : Stainless steel , BS970 431S29 or DIN17440x20Cr13
- Gasket : NBR
- Bonnet : GGG500-7
- O ring : NBR
Ductile Iron Globe Valve Supplier in Mumbai, Refer GGG50 Ductile Iron Plug Valve Dimensions
- Type : Screw Down Non-Return (SDNR) : Bolted Bonnet : Rising Stem : Angle
- Size & Connections : DN15 to DN300 : PN16/10 Flange (others on request)
- Duty : Air : Inert Gas : Oil : Seawater : Steam : Water
- Materials : Ductile Iron Body & Bonnet : Stainless Steel Stem : Stainless Steel Disc
- Pressure Rating : PN16
- Temperature : 120°C @ 16 Bar : 225°C @ 14 Bar
| Gate Valve |
Type 4004 - with flange and/or socket connection - with PE-HD ends - with rotatable flanges |
Type 2004 - with flange and/or socket connection - with rotatable flanges |
Type 1004 with PE-HD connection |
Type 3004 with weld-on ends |
| Butterfly Valve |
with flanges |
with Novo sockets |
long face-to-face length with/without bypass |
|
|
Underground
Fire Hydrants |
Type 304 with flange |
Type 305 with flange |
Type 304 S with spigot |
|
|
Pillar
Fire Hydrants |
Typ 494 Design AUD |
Type 495 Design AFUD |
||
| Tapping Valve |
NEW! TOP 1014 (disc tapping valve) |
TOP 1004 (vertical drilling) |
TOPsi1004 (horizontal drilling) |
|
| Tapping Clamp |
with internal pipe thread |
|||
|
Non-Slam Check Valve |
NEW! Type 8015 |
|||
| Flap Valve |
with flange connection |
| Item | Part Name | Material | Item | Part Name | Material |
| 1 | Body | GGG50 | 5 | Bonnet | GGG50 |
| 2 | Disc | GGG50 with NBR/SBR | 6 | Handwheel | GGG50 |
| 3 | Stem Nut | Brass with GGG50 | 7 | Brass Nut | Brass |
| 4 | Stem | Stainless Steel/2Cr13 |
F4 Ductile Iron Butterfly Valve
Ductile Iron Globe Valve
DIN 3202 F4 Check Valve
GGG50 Ductile Iron Non Return Valve
GGG50 Ductile Iron Plug Valve
Ductile Iron ggg50 Resilient Flanged Gate Valve
| DN(MM) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 | |
| L | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 350 | |
| D | PN10 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 395 | 445 | 505 | 565 | 670 |
| PN6 | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 | 520 | 580 | 715 | |
| DN | Nominal pressure | Test pressure Mpa | Max working pressure Mpa | |
| mm | BAR | body | seat | 80°C |
| 50-600 | 16 | 2,4 | 1,76 | 1,46 |
Get latest Price list of DIN 3202 F4 Check Valve, Buy Online Ductile Iron ggg50 Resilient Flanged Gate Valve
| body | ductile iron GGG40-50, EN-GJS-400/500-15 |
|---|---|
| disc | ductile iron GGG40-50, EN-GJS-400/500-15 |
| gear box | cast iron GG25, EN-GJL-250 |
| handwheel | cast iron GG25, EN-GJL-250 |
| stem | stainless steel X 20 CR 13 |
| body seat ring | stainless steel 304 |
| painting | epoxy 250 mcr min. |
| DN | L mm. | H mm. | D mm. | Weight kg. |
|---|---|---|---|---|
| 150 | 210 | 450 | 285 | 47 |
| 200 | 230 | 533 | 340 | 74 |
| 250 | 250 | 600 | 405 | 97.5 |
| 300 | 270 | 715 | 460 | 121.5 |
| 350 | 290 | 765 | 520 | 182 |
| 400 | 310 | 850 | 580 | 198 |
| 450 | 330 | 965 | 640 | 254 |
| 500 | 350 | 1080 | 715 | 334 |
| 600 | 390 | 1220 | 840 | 420 |
| 700 | 430 | 1307 | 910 | 631 |
| 800 | 470 | 1542 | 1025 | 742 |
| 900 | 510 | 1670 | 1125 | 990 |
| 1000 | 550 | 1770 | 1255 | 1291 |
| 1200 | 630 | 1962 | 1485 | 1601 |
| 1400 | 710 | 2230 | 1685 | 2430 |
| 1600 | 790 | 2510 | 1930 | 3500 |
| 1800 | 870 | 2850 | 2130 | 7830 |
| 2000 | 950 | 3000 | 2345 | 8732 |
| DN | Nominal pressure | Test pressure Mpa | Max working pressure Mpa | |
| mm | BAR | body | seat | 80°C |
| 150-2000 | 16 | 2,4 | 1,76 | 1,6 |
| DN | H mm. | D mm. PN 10 / 16 | Weight kg. |
|---|---|---|---|
| 40 | 120 | 150 | 6.5 |
| 50 | 120 | 165 | 7.5 |
| 65 | 150 | 185 | 11.5 |
| 80 | 180 | 200 | 13 |
| 100 | 240 | 220 | 18.5 |
| 125 | 300 | 250 | 29 |
| 150 | 350 | 285 | 41 |
| 200 | 400 | 340 | 69.5 |
| 250 | 450 | 395 /405 | 106.5 |
| 300 | 500 | 445 / 460 | 153 |
| 350 | 600 | 505 / 520 | 216 |
| 400 | 700 | 565 / 580 | 294.5 |
| 450 | 750 | 615/640 | 490 |
| 500 | 850 | 670/715 | 780 |
| 600 | 1000 | 780/840 | 900 |
Ready Stock of GGG50 Ductile Iron Non Return Valve, Stockholder of Ductile Iron Flap Valves
| DN | Nominal pressure | Test pressure Mpa | Max working pressure Mpa | |
| mm | BAR | body | seat | 90°C |
| 40-600 | 16 | 2,4 | 1,76 | 1,6 |
| 40-600 | 10 | 1,5 | 1,1 | 1,0 |