Carbon Steel ASTM A105 Gate Valve manufacturer in India

Carbon Steel Valves vary in types and functions such as screwed, flanged, high temperature, high pressure and other types. There are ball valves, plug valves, gate valves and needles valves all used for different purposes in fluid control systems. The carbon steel ball valves use balls inside the body of the valve that can move back and forth to close and open the flow. The ball valves are one of the most basic types of valves. The carbon steel gate valves are more ductile and tough at the same time. They have gates to regulate the liquid flow and they operate by a threaded stem attached to the gates. The threaded stem is rotated by a handwheel.

ASTM A105 Carbon Steel Ball Valve

ASTM A105 Carbon Steel Ball Valve

A105N CS Gate Gate Valve

A105N CS Gate Gate Valve

ASTM A350 LF2 Globe Valve

ASTM A350 LF2 Globe Valve

View ASTM A105N Butterfly Valve & ASTM A350 LF2 Globe Valve price per piece in India

There are different types of gate valves and the sizes and pressure capacities vary. Some valve are unidirectional and allow the materials to flow only in one direction where the other valves are bidirectional and allow the flow both ways.

 

What is Carbon Steel Valves?

The carbon steel butterfly valves are one type of gate valves. The gate is a disc in the shape of a butterfly. The valve sizes range from ½ inches to 48 inches and the pressure ratings vary from class 150 to class 2500 depending on the standards of the valves. The carbon steel check valves are unidirectional valves allowing the flow only in one direction and blocking the back flow.

Carbon Steel Valves Specification Table

Material Carbon Steel
Seal Material PTFE/ RPTFE
Working Pressure 1.6 – 6.4Mpa
Working Temperature

-29°C — +180°C

Availabe Size 1/2″-4″,(DN15-DN100)
Available Connection BSP/ BSPT/ NPT/ Flanged/ Welded
Nominal Pressure P10/PN16
Operation Manual,Pneumatic, Electric
Suitable Medium Water,Sewage,Seawater,Gas,Food,Oils,etc
Standards GB9112,DIN2501,BS4504,ISO2084,ANSI125
Applications Water, Oil, Gas,
Nominal Diameter

DN40-DN300 handle lever
DN350-DN1200 gear box

Operation Temperature -10°C~150°C

Chemical Composition CS Valves

Grade Ni C Mn Mo S P Si Cu Cr
Carbon Steel Valves 0.40 Max 0.30 Max 0.60 – 1.35 0.12 Max 0.040 Max 0.035 Max 0.15 – 0.30 0.04 Max 0.30 Max

Mechanical Properties of CS Valve

Element Tensile Strength Elongation Yield Strength (0.2%Offset)
Carbon Steel Valves 70,000 (485) 30 % 36,000 (250)

Low Carbon Steel Valve Stockist

ASTM A105N Swing Check Valve & ASME SA 105 Carbon Steel Needle Valves for Steam, Gas, Water

Mild CS Valve Density

Density 7.85 g/cm3

Cast Steel Check Valve Stock Range

Design:API600, BS1868, ASMEB16.34, ANSI B16.10, API 598
Body Material:ASTM A216 Gr WCB, ASTM A352 Gr LCC
Trim:API Trim No 8, API Trim No 5, API Trim No 16
Rating:Class 150 - 2" to 16", Class 300 - 2" to 12", 2" to 6" Class 600, 2" to 6" Class 900, 2" to 6" Class 1500

Various ASTM A105 Valve Types

ASTM A105N Butterfly Valve

ASTM A105N Butterfly Valve

ASTM A350 LF2 Globe Valve

ASTM A350 LF2 Globe Valve

ASTM A105 Swing Check Valve

ASTM A105 Swing Check Valve

ASME SA 105 Carbon Steel Needle Valves

ASME SA 105 Carbon Steel Needle Valves

Cast Carbon Steel Cryogenic Valves

Cast Carbon Steel Cryogenic Valves

Forged A105 Low Temperature Carbon Steel valve

Forged A105 Low Temperature Carbon Steel valve

Materials List of Cast Carbon Steel Swing Check Valve

Sl No Component Material
1 Body A 216 WCB
2 Bonnet A 216 WCB
3 Wedge / Disc A 216 WCB
4 Seat Ring / Body Ring SS 6603, 04Cr18Ni10
5 Nut & Bolt IS 1363
6 Bonnet Gasket Compressed Asbestos Fibre
7 Hinge Pin AiSi 410

Testing of Carbon Steel Swing Check Valve

Testing
Class 150 300 600
Hydrostatic body test PSI 425 1100 2175
Hydrostatic seat test PSI 300 750 1500
Forged A105 Low Temperature Carbon Steel valve for higher temperature application

Dimension Table of Class 150 CS Swing Check Valve

Dimensions ( 150 )
N.Bore F T L H
2 50 6 152 5/8 16 8 203 51/8 130
65 7 178 11/16 17 216 165
3 80 191 ¾ 19 241 165
4 100 9 229 15/16 23 11½ 292 81/8 206
6 150 11 279 1 25 14 355 235
8 200 13½ 343 11/8 29 19½ 495 107/8 176
10 250 16 406 13/16 30 24½ 623 13 330
12 300 19 483 32 27½ 699 151/8 384

Dimensions of Class 300 Cast Carbon Steel Swing Check Valve

Dimensions ( 300 )
N.Bore F T L H
2 50 165 7/8 22 10½ 367 61/8 155
65 191 1 25 11½ 292 171
3 80 210 11/8 29 12½ 318 171
4 100 10  254 32 14 356 213
6 150 12¼ 318 17/16 36 17½ 445 241
8 200 15 381 15/8 41 21 533 111/8 282
10 250 17½ 445 17/8 48 24½ 623 13¼ 337
12 300 20½ 521 2 51 28 712 153/8 390

Class 600 Carbon Steel Swing Check Valve Dimensions

Dimensions ( 600 )
N.Bore F T L H
2 50 165 1 25 11½ 292 51/8 130
65 191 11/8 29 13 330 71/8 181
3 80 210 32 14 356 71/8 181
4 100 10¾ 273 38 17 432 216
6 150 14 365 17/8 48 22 559 248
8 200                
10 250                
12 300                

Material Specification of Carbon Steel Gate Valve

Part Name Material Option
Body ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Bonnet ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Wedge@ ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Stem ASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Seat Rings@ ASTM A 216 WCB / A 217 WC6 / A 217 WC9 / A 217 C5 / A 217 C12 / A 351 CF8 / A 351 CF8M / A 351 CF3 / A 351 CF3M / A 352 LCB
Back Seat Bushing ASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Gland ASTM A 276 410 / A 276 304 / A 276 304L / A 276 316L
Gland Flange Carbon Steel / Stainless Steel
Stem Nut ASTM A 439 Gr.D2 / Al. Bronze
Lock Nut Carbon Steel / SS 304
Gland Packing Graphite Asbestos / Graphoil / PTFE
Bonnet Gasket Corrugated Soft Iron / Corrugated SS / Spiral Wound SS 304 with Asbestos or Graphoil / Octagonal Ring
Gland Eye - Bolt & Nut Carbon Steel / Stainless Steel
Cross Bolts & Nuts Carbon Steel / Stainless Steel
Hand Wheel Carbon Steel
Hand Wheel Nut Carbon Steel
Grease Nipple Carbon Steel
Grub Screw Carbon Steel
Studs / Bolts ASTM A 193 B7 / A 193 B7M / A 193 BBM / A 320 L7
Nut ASTM A 194 2H / A 194 8 / A 194 8M / A 194 4 / 7
Stockholder of Apollo Carbon Steel Ball Valves and Nibco lcs 6822, buy at dealer price

CS Gate Valve 150 Class Dimensions

Size DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 650 700 750 800 900 1000 1050
L-RF 178 191 203 228 254 267 292 330 355 381 406 432 457 508 559 609 609 660 711 812 860
**L1-BW 216 241 282 304 381 403 419 457 501 571 609 660 711 812 863 914 914 965 1016* 1066* 1143
H (approx) 425 435 535 600 705 800 1010 1250 1385 1575 1825 1950 2080 2425 2750 2825 3175 3473 3600 4100 4500
ØW 200 250 250 280 300 350 450 500 350* 350* 350* 350* 400* 400* 450* 450* 500* 500* 500* 500* 500*
Wt kg 22 29 37 56 78 84 138 210 310 450 565 740 927 1125 1425 1550 1950 2200 3050 3265 4250