UNS S31600 Stainless Steel 316 Valve manufacturer in India
Stainless Steel 316 Valves are used in sea water, brackish water, waste water management, food processing and in marine industrial applications for their corrosion resistance, strength and the chloride ion corrosion stress cracking properties. The valves made up of this material vary in size, shape and functions. The stainless steel 316 ball valve is made up of the 316 material with the ball made up of various material types depending on the application requirements. The ball is used to control the flow inside the valve body. There are other types that use plugs, gates and needles to control the flow.
316 Stainless Steel Pressure Relief Valve
UNS S31600 Stainless Steel 316 Valve
WNR 1.4401 SS 316 NRV Valves
WNR 1.4401 SS 316 NRV Valves price list ex Mumbai
The stainless steel 316 butterfly valve is a type of gate valve that is used to direct bidirectional flows. The gate resembles a butterfly with a central axis and symmetrical disc. There are different types of 316 stainless steel valves that range from ½ inches to 48 inches and with pressure capacities of 150lbs to 2500lbs based on their standard specifications. The application of these valves can be seen in different types of applications such as water, oil and gas, natural gas, power plant and other industrial applications as well.
Table of Content
The stainless steel 316 gate valve uses a gate to open and close the valve. The gate valves have a gate attached to a threaded stem connected to the handwheel which is turned to rotate the threaded stem and to raise and lower the gate. The gate enters and exits the seating to close and open the valve. The gate valves are advantageous against the water hammer effect as they go in and out gradually.
| Material | Stainless Steel |
|---|---|
| Seal Material | PTFE/ RPTFE |
| Working Pressure | 1.6 – 6.4Mpa |
| Working Temperature |
-29°C — +180°C |
| Availabe Size | 1/2″-4″,(DN15-DN100) |
| Available Connection | BSP/ BSPT/ NPT/ Flanged/ Welded |
| Nominal Pressure | P10/PN16 |
| Operation | Manual,Pneumatic, Electric |
| Suitable Medium | Water,Sewage,Seawater,Gas,Food,Oils,etc |
| Standards | GB9112,DIN2501,BS4504,ISO2084,ANSI125 |
| Applications | Water, Oil, Gas, |
| Nominal Diameter |
DN40-DN300 handle lever
|
| Operation Temperature | -10°C~150°C |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 - 18.00 | 2.00 - 3.00 | 11.00 - 14.00 | 67.845 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401 / 1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | - | Z7CND17-11-02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
Biggest UNS S31600 Angle Control and butterfly valve Supplier in Mumbai
| Size | Cv | Wt (lbs) |
| 1/2" | 18 | 3.52 |
| 3/4" | 36 | 4.71 |
| 1" | 48 | 6.34 |
| 1-1/2" | 165 | 12.98 |
| 2" | 207 | 18.66 |
| 2-1/2" | 450 | 30.14 |
| 3" | 780 | 38.61 |
| 4" | 1360 | 65.52 |
| 6" | 2600 | 163.00 |
| 8" | 4200 | 282.00 |
| Size/▲P | 75 psig | 150 psig | 300 psig |
| 5 Bar | 10 Bar | 20 Bar | |
| 1/2" | 53 | 53 | 53 |
| 3/4" | 62 | 62 | 62 |
| 1" | 97 | 97 | 106 |
| 1-1/2" | 186 | 186 | 212 |
| 2" | 265 | 283 | 310 |
| 2-1/2" | 425 | 442 | 478 |
| 3" | 690 | 699 | 788 |
| 4" | 1,062 | 1,071 | 1,186 |
| 6" | 2,973 | 2,982 | 3,310 |
| 8" | 3,929 | 4,186 | 4,743 |
| Ref # | Description | Material |
| 1 | End Cap | CF8M |
| 2 | Body | CF8M |
| 3 | Ball | CF8M |
| 4 | Ball Seat | TFM1600+20%GF |
| 5 | Stem (Anti-Static Device) | 316 |
| 6 | Thrust Washer | PTFE |
| 7 | O-Ring | FKM |
| 8 | Packing | PTFE |
| 9 | Bushing | 50%SS+50%PTFE |
| 10 | Gland | 316 |
| 11 | Belleville Washer | 301 |
| 12 | Stem Nut | A194-8 |
| 13 | Handle Nut (1/2"–2-1/2") | 304 |
| 14 | Stop-lock-cap | 304 |
| 15 | Handle Gland | 304 |
| 16 | Lock Device (1/2"–2-1/2") | 304 |
| 17 | Handle (1/2"–2-1/2") | 304 |
| 18 | Handle Sleeve (1/2"–2-1/2") | 304 |
| 19 | Body Gasket | PTFE |
| 20 | Bolt Nut | A194-8 |
| 21 | Bolting | A193-B8 |
| 22 | Stop Bolt | A2-70 |
| 23 | Stop Nut | A2-70 |
| 24 | Handle Adapter (3"–8") | CF8 |
| 25 | Set Screw (3"–8") | A2-70 |
| 26 | Bolting (3"–8") | A2-70 |
| 27 | Pipe Handle (3"–8") | A53+Zn Plated |
| 28 | Handle Sleeve (3"–8") | Vinyl Plastic |
SS 316 NRV Valves
316 stainless steel Globe valves
316 SS Trunnion Ball Valve
UNS S31600 Angle Control Valve
SS 316 Y Type Control Valve
DIN 1.4401 Plug Valves
| Size | d | L | R | D | C | T | f | N | h | H | H1 | M | P | U1 | U2 | E1 | E2 | W | ISO 52111 | Torque (in-lbs) | Weight (lbs) |
| 1/2" | 0.59 | 4.25 | 1.38 | 3.50 | 2.38 | 0.31 | 0.06 | 4 | 5/8 | 1.93 | 3.11 | 0.30 | 0.354 | 0.24 | 0.24 | 1.42 | 1.65 | 5.77 | F03–F04 | 57 | 3.52 |
| 3/4" | 0.79 | 4.62 | 1.69 | 3.88 | 2.75 | 0.34 | 0.06 | 4 | 5/8 | 2.09 | 3.31 | 0.35 | 0.354 | 0.24 | 0.28 | 1.42 | 1.97 | 5.77 | F03–F05 | 69 | 4.71 |
| 1" | 0.98 | 5.00 | 2.01 | 4.25 | 3.12 | 0.38 | 0.06 | 4 | 5/8 | 2.32 | 3.54 | 0.43 | 0.433 | 0.24 | 0.28 | 1.65 | 1.97 | 6.95 | F04–F05 | 115 | 6.34 |
| 1-1/2" | 1.50 | 6.50 | 2.88 | 5.00 | 3.88 | 0.50 | 0.06 | 4 | 5/8 | 2.99 | 4.33 | 0.55 | 0.551 | 0.28 | 0.35 | 1.97 | 2.76 | 7.75 | F05–F07 | 218 | 12.98 |
| 2" | 1.97 | 7.00 | 3.62 | 6.00 | 4.75 | 0.56 | 0.06 | 4 | 3/4 | 3.23 | 4.53 | 0.55 | 0.551 | 0.28 | 0.35 | 1.97 | 2.76 | 7.75 | F05–F07 | 334 | 18.66 |
| 2-1/2" | 2.50 | 7.50 | 4.12 | 7.00 | 5.50 | 0.62 | 0.06 | 4 | 3/4 | 4.02 | 5.91 | 0.67 | 0.669 | 0.35 | 0.43 | 2.76 | 4.02 | 10.5 | F07–F10 | 517 | 30.14 |
| 3" | 2.99 | 8.00 | 5.00 | 7.50 | 6.00 | 0.69 | 0.06 | 4 | 3/4 | 4.41 | 6.93 | 0.67 | 0.669 | 0.35 | 0.43 | 2.76 | 4.02 | 11.9 | F07–F1 | 828 | 38.61 |
| 4" | 3.94 | 9.00 | 6.19 | 9.00 | 7.50 | 0.88 | 0.06 | 8 | 3/4 | 5.51 | 8.31 | 0.87 | 0.866 | non | 0.43 | non | 4.02 | 15.8 | F10 | 1,265 | 65.52 |
| 6" | 5.91 | 15.5 | 8.50 | 11.0 | 9.50 | 0.94 | 0.06 | 8 | 7/8 | 7.99 | 11.18 | 1.06 | 1.063 | 0.55 | non | 4.92 | non | 31.6 | F12 | 3,520 | 163.00 |
| 8" | 7.97 | 18.0 | 10.63 | 13.5 | 11.75 | 1.06 | 0.06 | 8 | 7/8 | 9.96 | 13.15 | 1.06 | 1.063 | 0.55 | non | 4.92 | non | 31.6 | F12 | 4,947 | 282.00 |
- Design: ASME B16.34
- Pressure Test: API 598
- Flange Dimensions: ASME B16.5
- Materials: ASME B16.34
- Mounting Pad: ISO 5211
- NACE MR-01-75 Approved
View SS 316 Y Type Control Valve Pressure Rating, Wide range of Size Available 316 stainless steel solenoid valves
- Full port
- 150 WSP
- Flanged connection
- TFM seats
- Stainless steel trim
- Anti static design
- Blowout-proof stem
- Investment cast body
- Adjustable packing
- Locking device
- Actuator mounting pad
- Manufactured silicone free
- Sizes 1/2" – 8"
| stainless steel 316 Diaphragm Valve | DIN 1.4401 Plug Valve |
| SS 316 Y Type Control Valve | stainless steel 316 Ball Valve |
| 316 Stainless Steel Trunnion Ball Valve | SS 316 Butterfly Valve |
| 316 SS Swing Check Valve | 316 Stainless Steel Reducing Valve |
| uns S31600 Gate Valve | 316 SS Needle Valve |
| ss uns S31600 Globe Valve | uns S31600 Angle Control Valve |
| ss316 Cryogenic Valve | ss uns S31600 Pinch Valve |
- Max. Tempurature: 400°F
- Max. Pressure: 1000 PSIG
- Max. Temperature: 400°F
- Max. Pressure: 800 PSIG
Ready Stock of type 316 SS ball valves, Leading Distributor of DIN 1.4401 Plug Valve
| BFY | Sanitary Butterfly valves, Pneumatic, Electric, Manual | TriClamp or Butt Weld, 1/2" to 6" , | 110 PSIG | up to 200°F |
| HP | High Performance Butterfly valves, Pneumatic, Electric, Manual | Class 150 or 300, Lugged or Wafer, 2" to 12" , | Class 150: 285 PSIG, Class 300: 740 PSIG | -4°F to 450°F |